FAQ RoHS/Report ISO order inquiry Profile HOME ENGLISH Chinese Simplified Chinese Traditional BENNIC

X-OVER NETWORK Inductors Non-Polar Capacitors *Co-Axial Speaker Use *X-OVER Network Use Reliable Film Capacitors Non-Polar Capacitors *Co-Axial Speaker Use *X-OVER Network Use Uni-Polar Aluminium Electrolytic Capacitors For Speaker *Binding Post *Terminals CEMENT TYPE WIRE WOUND RESISTORS L-PAD Attenuators


BENNIC \ NON-POLAR CAPACITORS \ BENNIC ACOUSTIC CAPACITORS \
ELECTROLYTIC CAPACITORS >> P03 | B03 | B04 | B05 | B06 | B10 | B12 | B15 | N04 | N06 | N10
METALLIZED POLYESTER FILM CAPACITORS >> BMET (PEMT) | BMEF (PEMF) | BMED (PEMD)
METALLIZED POLYPROPYLENE FILM CAPACITORS >> BMPT (PPMT) | XPP | FPP | UPP

"BENNIC" NON-POLAR ELECTROLYTIC CAPACITORS
B15A , B15S , B15R SERIES

 
1) FIGURE : B15A(AXIAL) B15S (AXIAL SPOT) B15R(RADIAL)

LEAD WIRE DIA AT mm, TOL. ± 0.05 mm (AXIAL DIA 12 øLEAD DIA MAYBE 0.6 mm)
CASE DIA 5 ø 6 ø 8 ø 10 ø 12 ø 13 ø 16 ø 18 ø 20 ø 22 ø 25 ø
AXIAL - 0.6 0.6 0.6 0.8 0.8 0.8 0.8 0.8 0.8 0.8
RADIAL 0.5 0.5 0.6 0.6 - 0.6 0.8 0.8 0.8 0.8 0.8

LEAD LENGTH : AXIAL min. 40mm., RADIAL min. 20 mm & 25 mm
RADIAL LEAD PITCH AT mm TOL. ± 0.5 mm
CASE DIA 5 ø 6 ø 8 ø 10 ø 13 ø 16 ø 18 ø 20 ø 22 ø 25 ø
LEAD PITCH 2.0 2.5 3.5 5.0 5.0 7.5 7.5 8.0 10.0 12.5

2) TOL. RANGE : ± 20% (M), or ± 10% (K) @1KHZ
3) LEAKAGE : Max 0.04 CV +3 μA , B15S Max 0.1 CV +3 μA AFTER CHARGE 5 MINUTES
4) TEMP. RANGE : - 40 ºC TO +85 ºC ( UPON REQUESTED - 40 ºC TO +105 ºC )
5) SURGE VOLT : 32V-FOR 25WV., 63V-FOR 50WV., 125V FOR 100WV
6) LIFE TEST : FOLLOWING CHARACTERISTICS SHALL BE SATISFIED WHEN RETURN TO 25 ºC , AFTER RATED VOLTAGE APPLIED FOR 1,000 HOURS AT 85 ºC :
(a) CAPACITANCE CHANGE : WITHIN ± 20% OF INITIAL VALUE
(b) DISSIPATION FACTOR : WITHIN 200% OF INITIAL VALUE
(c) LEAKAGE CURRENT : WITHIN INITIAL VALUE
7) SHELF LIFE : FOLLOWING CHARACTERISTICS SHALL BE SATISFIED WHEN RETURN TO 25 ºC , AFTER WITHOUT RATED VOLTAGE APPLIED 1000HRS AT 85 ºC :
(a) CAPACITANCE CHANGE : WITHIN ± 20% OF INITIAL MEASURED VALUE
(b) DISSIPATION FACTOR : WITHIN 200% OF INITIAL MEASURED VALUE
(c) LEAKAGE CURRENT : WITHIN INITIAL MEASURED VALUE
8) MAX. D.F. : Max 10% @ 120HZ
Max 15% FOR 50V / 100V @ 1KHZ
9) MARKING :

BENNIC
xxx MFD
xxx WV
NP



or   
BENNIC
BI-POLAR
xxx μF
xxx WV
  (MAYBE USE B P INSTEAD OF BI-POLAR)
10) Sleeve Standard color : Black, Dark blue

11) CASE SIZE (DxL) TABLE (FOR STANDARD VALUE) - AT mm, TOL. ± 1 mm
SERIES B15A(AXIAL) B15S (AXIAL SPOT) B15R (RADIAL)
MFD \ WV 50WV 100WV 50WV 100WV 50WV 100WV
0.47 6.3 x 16 6.3 x 16 6 x 13 6 x 13 5 x 11 6.3 x 11
1.0 6.3 x 16 6.3 x 16 6 x 13 6 x 13 5 x 11 6.3 x 11
1.5 6.3 x 16 6.3 x 16 6 x 13 6 x 13 5 x 11 6.3 x 11
2.2 6.3 x 16 8 x 17 6 x 13 8 x 13 5 x 11 6.3 x 11
2.7 6.3 x 16 8 x 17 6 x 13 8 x 13 5 x 11 6.3 x 11
3.3 6.3 x 16 8 x 17 6 x 13 8 x 13 5 x 11 8 x 13
4.7 6.3 x 16 8 x 17 6 x 13 8 x 13 6.3 x 11 8 x 13
5.6 6.3 x 16 8 x 17 6 x 13 8 x 13 6.3 x 11 8 x 13
6.8 8 x 17 10 x 18 8 x 13 10 x 16 6.3 x 11 8 x 13
8.2 8 x 17 10 x 18 8 x 13 10 x 16 8 x 13 10 x 15
10 8 x 17 10 x 18 8 x 13 10 x 16 8 x 13 10 x 15
15 8 x 17 10 x 25 8 x 13 10 x 21 8 x 13 10 x 20
22 10 x 18 10 x 25 10 x 16 10 x 21 8 x 13 10 x 20
33 10 x 18 12 x 26 10 x 16 13 x 21 10 x 15 13 x 21
47 10 x 25 12 x 26 10 x 21 13 x 21 10 x 15 13 x 21
68 12 x 26 13 x 31 13 x 21 13 x 26 10 x 20 13 x 26
75 12 x 26 13 x 31 13 x 21 13 x 26 10 x 20 13 x 26
82 12 x 26 16 x 34 13 x 21 16 x 32 10 x 20 13 x 26
100 12 x 26 16 x 34 13 x 21 16 x 32 10 x 20 16 x 27
120 12 x 26 16 x 34 13 x 21 16 x 32 10 x 20 16 x 27
150 12 x 26 16 x 42 13 x 21 16 x 42 13 x 21 16 x 36
220 12 x 31 18 x 42 13 x 26 18 x 42 13 x 26 18 x 36
270 13 x 31 18 x 42 13 x 26 18 x 42 13 x 26 18 x 36
330 16 x 34 22 x 44 16 x 32 22 x 43 16 x 27 22 x 37
390 16 x 34 22 x 44 16 x 32 22 x 43 16 x 27 22 x 37
470 16 x 42 25 x 52 16 x 42 22 x 52 16 x 36 25 x 43
560 18 x 42 25 x 52 18 x 42 22 x 52 16 x 36 25 x 43
680 18 x 42 25 x 56 18 x 42 25 x 53 18 x 36 25 x 48
750 22 x 44 25 x 56 22 x 43 25 x 53 22 x 37 25 x 48
820 22 x 44 25 x 56 22 x 43 25 x 53 22 x 37 25 x 48
1000 25 x 46 25 x 60 25 x 43 25 x 53 22 x 37 25 x 53

12) MAXIMUM RIPPLE CURRENT (mA) (at 1KHz , 85 ºC)
SERIES B15A(AXIAL) B15S (AXIAL SPOT) B15R (RADIAL)
MFD \ WV 50WV 100WV 50WV 100WV 50WV 100WV
0.47 19 19 18 18 18 20
1.0 28 28 26 26 26 29
1.5 35 35 31 31 32 36
2.2 42 50 38 44 38 43
2.7 47 56 42 49 43 48
3.3 52 61 47 54 47 65
4.7 62 73 56 64 64 78
5.6 67 80 61 70 69 85
6.8 88 104 77 96 76 103
8.2 97 114 85 105 113 134
10 107 126 94 116 124 148
15 131 181 115 163 152 195
22 188 219 172 197 185 236
33 230 294 211 275 269 350
47 321 351 288 329 321 418
68 422 480 395 440 414 539
75 444 504 415 462 435 566
82 464 613 434 594 455 591
100 512 677 479 656 502 761
120 561 741 525 719 550 833
150 627 921 587 899 747 1025
220 830 1183 791 1154 969 1341
270 957 1310 876 1279 1073 1486
330 1229 1658 1192 1583 1382 1898
390 1336 1802 1296 1720 1503 2064
470 1630 2267 1591 2127 1814 2631
560 1887 2475 1842 2322 1980 2871
680 2080 2830 2030 2753 2358 3253
750 2499 2972 2386 2892 2862 3417
820 2613 3108 2495 3023 2992 3573

** ANY SPECIAL VALUE ARE ACCEPTABLE, ITS SIZE TO BE PROVIDED UPON REQUESTED
** SIZE MAYBE CHANGED W/O NOTICE., SPECIAL SIZE IS ACCEPTABLE
** AXIAL SIZE 8 x 17 MAYBE 10 x 18
** AXIAL SIZE 6.3 x 16 MAYBE 8 x 17

** Case size table are our standard series / size / value . Any special requested upon discussion.

** Here we only accept to use the following sleeve color for the full compliance with the
    Sony SS-00259 (the sleeve must be use PET material):Black, Dark blue
    or all other color will be accepted only based M.O.Q. 500K per order for each item,
    otherwise unless you could accept non-compliance Sony SS-00259
    (Still compliance with RoHS required).



E-Mail:mail@bennic.com.tw