FAQ RoHS/Report ISO order inquiry Profile HOME ENGLISH thai Chinese Simplified Chinese Traditional BENNIC

X-OVER NETWORK Cable Harness Non-Polar Capacitors *Co-Axial Speaker Use *X-OVER Network Use Reliable Film Capacitors Non-Polar Capacitors *Co-Axial Speaker Use *X-OVER Network Use Axial Electrolytic Capacitors For Speaker *Binding Post *Terminals CEMENT TYPE WIRE WOUND RESISTORS Inductors L-PAD Attenuators


BENNIC \ NON-POLAR CAPACITORS \ BENNIC ACOUSTIC CAPACITORS \
ELECTROLYTIC CAPACITORS >> P03 | B03 | B04 | B05 | B06 | B10 | B12 | B15 | B25
                                 | N04 | N06 | N10
METALLIZED POLYESTER FILM CAPACITORS >> BMET (PEMT) | BMEF (PEMF) | BMED (PEMD)
METALLIZED POLYPROPYLENE FILM CAPACITORS >> BMPT (PPMT) | XPP | SPP | FPP

FPP SERIES

METALLIZED POLYPROPYLENE FILM CAPACITORS
FPP SERIES
FPP (Pure Copper leads) / FPPag (Pure Silver leads)
HI-END X-OVER NETWORK USE
Refreshing Sound

1) FIGURE :

BODY SIZE : SEE BELOWING BODY SIZE TABLE.,
FPP Series LEAD LENGTH MIN. 30 mm.
FPPag Series FOR OD under 30 ø LEAD LENGTH MIN. 20 mm.
FPPag Series FOR OD 30~50 ø LEAD LENGTH MIN. 30 mm.
FPPag Series FOR OD exceed 50 ø LEAD LENGTH MIN. 40 mm.
SOLID LEAD DIA : FPP Series- 0.8 ø FOR OD under 19ø.. 1.0 ø FOR OD EXCEED 19ø
FPPag Series- 1.0ø
COLOR : BLACK TAPE,WHITE BODY, WHITE WORDING.
(UL FLAME RETARDANT BODY RESIN)

2) CHARACTERISTCS :
CAP. TOLERANCE : ± 10%(K) or ± 5%(J) or ± 2.5% (H) or ± 1%(F).
DISSIPATION FACTOR : Max 0.0006 (0.06%) AT 1KHZ.
OPERATION TEMP. : - 40 ºC TO +105 ºC
CAPACITANCE DRIFT : Max. 2% CYCLED THROUGHT THE OPERATING TEMP. RANGE.
INSULATING RESIS : C ≤ 0.33μF ,   I.R. ≥ 9000 Mega-Ohm (AT 20 ºC, 1min)
C > 0.33μF ,   I.R ≥ 7500 Mega-Ohm (AT 20 ºC, 1min)
LIFE TEST : 150% OF RATED WORKING VOLTAGE AT 105 ºC FOR 1,000 HOURS.
HUMIDITY : CAPS Max. 5% D.F. Max 2% I.R. Min 70% UNER R.H. 95% @40 ºC 1,000 HOURS.
LEAD PULL FORCE : Min. 1.5KGS AT 30 MINUTES , ROOM TEMPERATURE .
LEAD BEND FORCE : NOT BREAK AT 90º FOR 1 CYCLE.

3) MARKING :

BENNIC

FPP xxxVDC
xxx μF x%


4) BODY SIZE (DxL) TABLE
(FOR STANDARD VALUE) - AT mm.
  TOL. L ± 1 mm , T/H <10mm ± 1 mm , T/H10~20mm ± 2 mm , T/H>20mm ± 2.5 mm
  W V 100VDC 250VDC 400VDC 630VDC
SYMBOL MDF D L D L D L D L
104 0.1 6.5 15 6.5 15 5.8 20 10.4 20
154 0.15 6.4 15 7.7 15 6.8 20 12.5 20
224 0.22 5.7 20 6.8 20 7.9 20 15.0 20
334 0.33 6.7 20 8.1 20 9.5 20 15.0 25
474 0.47 7.8 20 9.5 20 11.2 20 17.8 25
684 0.68 9.1 20 11.2 20 11.0 25 17.7 32
824 0.82 9.9 20 12.2 20 12.0 25 19.4 32
105 1 9.1 25 11.1 25 11.0 32 21.3 32
125 1.2 9.9 25 12.1 25 12.0 32 23.3 32
135 1.3 10.2 25 12.6 25 12.5 32 22.4 36
155 1.5 10.9 25 13.4 25 13.3 32 24.0 36
185 1.8 11.9 25 14.6 25 14.5 32 26.2 36
205 2 12.5 25 12.9 32 15.3 32 23.6 46
225 2.2 13.0 25 13.5 32 16.0 32 24.7 46
255 2.5 13.9 25 14.4 32 17.1 32 26.3 46
275 2.7 14.5 25 14.9 32 17.7 32 27.4 46
305 3 15.2 25 15.7 32 18.6 32 28.8 46
335 3.3 13.3 32 16.4 32 19.5 32 30.2 46
395 3.9 14.4 32 17.8 32 19.5 36 32.8 46
405 4 14.5 32 18.0 32 19.8 36 33.2 46
435 4.3 15.1 32 18.6 32 20.5 36 34.4 46
475 4.7 15.7 32 19.4 32 21.4 36 35.9 46
505 5 16.2 32 20.0 32 22.0 36 37.0 46
565 5.6 17.4 32 19.9 36 23.7 36 35.1 56
605 6 18.0 32 20.5 36 24.5 36 36.3 56
635 6.3 18.4 32 21.0 36 25.1 36 37.2 56
685 6.8 19.1 32 21.8 36 22.1 46 38.6 56
685 6.8 19.1 32 21.8 36 22.1 46 38.6 56
755 7.5 20.0 32 19.5 46 23.2 46 38.5 61
805 8 20.7 32 20.1 46 24.0 46 39.7 61
825 8.2 20.9 32 20.3 46 24.2 46 40.2 61
106 10 21.2 36 22.4 46 26.7 46 42.3 66
126 12 23.1 36 24.4 46 29.2 46 46.3 66
146 14 24.9 36 26.3 46 31.5 46    
156 15 22.1 46 27.4 46 28.9 56    
186 18 24.1 46 29.9 46 31.6 56    
206 20 25.4 46 27.9 56 33.3 56    
226 22 26.5 46 29.2 56 34.9 56    
256 25 28.2 46 31.1 56 37.1 56    
276 27 29.3 46 32.3 56 38.6 56    
336 33 28.6 56 35.6 56 38.6 66    
356 35 29.5 56 36.6 56 39.7 66    
396 39 31.0 56 38.6 56 41.9 66    
476 47 34.0 56 42.3 56 45.9 66    
566 56 37.0 56 46.1 56 44.4 81    
686 68 40.7 56 46.0 66 48.9 81    
756 75 42.8 56 48.3 66        
826 82 44.7 56 48.3 71        
107 100 44.7 66 49.4 81        
187 180 46.5 81 47.0 81        

** ANY SPECIAL VALUE ARE ACCEPTABLE, ITS SIZE TO BE PROVIDED UPON REQUESTED
** SIZE MAYBE CHANGED W/O NOTICE., SPECIAL SIZE IS ACCEPTABLE UPON DISCUSSION


E-Mail:mail@bennic.com.tw