FAQ RoHS/Report ISO order inquiry Profile HOME ENGLISH Chinese Simplified Chinese Traditional BENNIC

X-OVER NETWORK Inductors Non-Polar Capacitors *Co-Axial Speaker Use *X-OVER Network Use Reliable Film Capacitors Non-Polar Capacitors *Co-Axial Speaker Use *X-OVER Network Use Uni-Polar Aluminium Electrolytic Capacitors For Speaker *Binding Post *Terminals CEMENT TYPE WIRE WOUND RESISTORS L-PAD Attenuators


BENNIC \ NON-POLAR CAPACITORS \ SOUNDER ACOUSTIC CAPACITORS
ELECTROLYTIC CAPACITORS >> S05A & S05R | S10A & S10R
METALLIZED POLYESTER FILM >> SMET (AXIAL TUBULAR) | SMED (RADIAL DIPPED)
METALLIZED POLYPROPYLENE FILM >> SMPT (AXIAL TUBULAR) | SMPD (RADIAL DIPPED)

SOUNDER
S10A & S10R SERIES
BI-POLAR ELECTROLYTIC CAPACITORS



1) FIGURE : S10A (AXIAL ) S10R (RADIAL )

LEAD WIRE DIA AT mm, TOL. ± 0.05 mm (AXIAL DIA 12 øLEAD DIA MAYBE 0.6 mm)
CASE DIA 8 ø 10 ø 12 ø 13 ø 16 ø 18 ø 20 ø 22 ø 25 ø
AXIAL 0.6 0.6 0.8 0.8 0.8 0.8 0.8 0.8 0.8
RADIAL 0.6 0.6 - 0.6 0.8 0.8 0.8 0.8 0.8

LEAD LENGTH : AXIAL min. 25mm., RADIAL min. 20 mm & 25 mm
RADIAL LEAD PITCH AT mm TOL. ± 0.5 mm
CASE DIA 8 ø 10 ø 13 ø 16 ø 18 ø 20 ø 22 ø 25 ø
LEAD PITCH 3.5 5.0 5.0 7.5 7.5 8.0 10.0 12.5

2) CAP. TOL. RANGE :

± 10% (K), or ± 5% (J) @1KHZ
3) LEAKAGE
 
Max 0.04 CV +3 μA AFTER CHARGE 5 MINUTES AT25 ºC
4) TEMP. RANGE :
  
- 40 ºC TO +85 ºC
5) SURGE VOLT :
  
63V FOR 50WV, 125V FOR 100WV
6) MAX. D.F. :

Max 10% @1KHZ .
7) MARKING :
 
SOUNDER
xxx μF xxx V
NP 85 ºC
8) Sleeve Standard color : BLACK , DARK BLUE

9) CASE SIZE (DxL) TABLE (FOR STANDARD VALUE) - AT mm, TOL. ± 1 mm
SERIES S10A (AXIAL) S10R (RADIAL)
MFD \ WV 50 WV (D x L) 100 WV (D x L) 50 WV (D x L) 100 WV (D x L)
1.0 8 x 17 10 x 18 8 x 13 10 x 15
1.5 8 x 17 10 x 18 8 x 13 10 x 15
2.2 8 x 17 10 x 18 8 x 13 10 x 15
2.7 8 x 17 10 x 18 8 x 13 10 x 15
3.3 8 x 17 10 x 18 8 x 13 10 x 15
3.9 8 x 17 10 x 18 8 x 13 10 x 15
4.7 8 x 17 10 x 18 8 x 13 10 x 15
5.6 10 x 18 10 x 18 8 x 13 10 x 15
6.8 10 x 18 10 x 18 8 x 13 10 x 15
7.5 10 x 18 10 x 18 8 x 13 10 x 15
8.2 10 x 18 10 x 18 8 x 13 10 x 15
10 10 x 18 10 x 18 10 x 15 10 x 15
12 10 x 18 12 x 26 10 x 15 10 x 20
15 10 x 18 12 x 26 10 x 15 10 x 20
18 10 x 18 12 x 26 10 x 20 10 x 20
22 10 x 18 12 x 26 10 x 20 13 x 21
27 12 x 26 12 x 26 10 x 20 13 x 21
33 12 x 26 12 x 26 10 x 20 13 x 21
39 12 x 26 12 x 26 13 x 21 13 x 21
47 12 x 31 12 x 31 13 x 21 13 x 21
56 12 x 31 12 x 31 13 x 21 16 x 27
68 12 x 31 13 x 31 13 x 21 16 x 27
75 12 x 31 16 x 34 13 x 21 16 x 27
82 12 x 31 16 x 34 13 x 26 16 x 27
100 12 x 31 16 x 34 13 x 26 16 x 27
120 12 x 31 16 x 34 16 x 27 16 x 27
150 16 x 34 16 x 42 16 x 27 16 x 36
180 16 x 34 18 x 42 16 x 27 16 x 36
220 16 x 34 18 x 42 16 x 27 18 x 36
270 16 x 34 18 x 42 16 x 27 18 x 36
330 16 x 42 22 x 44 16 x 36 22 x 37
390 16 x 42 22 x 44 16 x 36 22 x 37
470 18 x 42 25 x 52 18 x 36 25 x 43

** ANY SPECIAL VALUE ARE ACCEPTABLE, ITS SIZE TO BE PROVIDED UPON REQUESTED
** SIZE MAYBE CHANGED W/O NOTICE., SPECIAL SIZE IS ACCEPTABLE
**AXIAL SIZE 8 x 17 MAYBE 10 x 18

** Case size table are our standard series / size / value . Any special requested upon discussion.

** Here we only accept to use the following sleeve color for the full compliance with the
    Sony SS-00259 (the sleeve must be use PET material):Black, Dark blue
    or all other color will be accepted only based M.O.Q. 500K per order for each item,
    otherwise unless you could accept non-compliance Sony SS-00259
    (Still compliance with RoHS required).


E-Mail:mail@bennic.com.tw