FAQ RoHS/Report ISO order inquiry Profile HOME ENGLISH Chinese Simplified Chinese Traditional BENNIC

X-OVER NETWORK Inductors Non-Polar Capacitors *Co-Axial Speaker Use *X-OVER Network Use Reliable Film Capacitors Non-Polar Capacitors *Co-Axial Speaker Use *X-OVER Network Use Uni-Polar Aluminium Electrolytic Capacitors For Speaker *Binding Post *Terminals CEMENT TYPE WIRE WOUND RESISTORS L-PAD Attenuators


BENNIC \ UNI-POLAR ALUMINIUM ELECTROLYTIC CAPACITORS \
   SL(Axial) | SL(Radial)/TM | MN MX | LL LX | ML | LN | TM | TX |
   HA | HX | PB PX | SD | SI | SX | LG | SW |     [ General Information ]

BENNIC
ALUMINIUM ELECTROLYTIC CAPACITORS

MN,MX Series Used in General Electronic as Coupling. By-pass, Filter etc.
The product is applied for 85 ºC (MN Series) or 105 ºC (MX Series).
General Electronic Circuits.
SPECIFICATION
ITEM SPECIFICATION
Capacitance Tolerance
(120Hz 20 ºC )
± 20%(M)
Rated Working
Voltage
4 ~ 63WV
Operation
Temperature Range
-40 ~ +85 ºC (MN Series)    -40 ~ +105 ºC (MX Series)
Surge Voltage (V)
( 20 ºC )
WV 4 6.3 10 16 25 35 50 63
SV 5 8 13 20 32 44 63 79
Leakage Current
( μA)( 20 ºC )
I 0.01CV + 3 μA
Whichever is greater after rated voltage applied for 3 minutes
I:Leakage Current ( μA) C:Capacitance( μF) V:Voltage(V)
Dissipation Factor(%)
(120Hz,20 ºC )
WV 4 6.3 10 16 25 35 50 63
DF 35 24 20 16 14 12 10 8
Low Temperature
Characteristics
Impedance Ratio at 120HZ
Comparison Z \ WV 4 6.3 10 16 25 35 50 63
-25 ºC / 20 ºC 6 4 3 2 2 2 2 2
-40 ºC / 20 ºC 12 8 6 4 4 4 4 4
Load Life After 1000 hours application of W.V.
at 85 ºC (MN Series) or 105 ºC (MX Series)
The capacitor shall meet the following limits .
(a) Capacitance Change Within ± 20% of  Initial Measured Value
(b) Dissipation Factor Within ± 200% of  Initial Measured Value
(c) Leakage Current Within Initial Measured Value
Shelf Life Following characteristics shall be satisfied when return to 25 ºC,
after without rated voltage applied 1000 hours
at 85 ºC (MN Series) or 105 ºC (MX Series)
(a) Capacitance Change Within ± 20% of  Initial Measured Value
(b) Dissipation Factor Within ± 200% of  Initial Measured Value
(c) Leakage Current Within Initial Measured Value

Sleeve Standard color : BLACK, DARK BLUE.
    Or all other color will be accepted only based M.O.Q. 500K per order for each item,
    otherwise unless you could accept non-compliance Sony SS-00259
    (Still compliance with RoHS required).

DIMENSIONS (unit:mm)


øD 4 5 6.3 8
P 1.5 2.0 2.5 3.5
ød 0.45 0.45 0.45 0.6
a 1.0 1.0 1.0 1.0
b 0.5 0.5 0.5 0.5


CASE SIZE (mm) øD x L
μF \ WV 4 6.3 10 16 25 35 50 63
0.1             4x7 4x7
0.22             4x7 4x7
0.33             4x7 4x7
0.47             4x7 4x7
1.0             4x7 4x7
2.2             4x7 4x7
3.3             4x7 4x7
4.7           4x7 4x7 5x7
10       4x7 4x7 5x7 6.3x7  
22     4x7 4x7 5x7 6.3x7    
33 4x7 4x7 4x7 5x7 6.3x7      
47 4X7 4x7 5x7 6.3x7        
100 5x7 5x7 6.3x7 6.3x7        
220 6.3x7 6.3x7 8x7          


MAXIMUM RIPPLE CURRENT (mA) 120Hz / 85 ºC (MN Series) 105 ºC (MX Series)
μF \ WV 4 6.3 10 16 25 35 50 63
0.1             1.0 1.3
0.22             2.3 2.9
0..33             3.5 4.4
0.47             5.0 7.9
1.0             10 11
2.2             15 17
3.3             18 21
4.7           24 23 26
10       29 32 36 38  
22     35 39 48 57    
33 33 40 43 55 63      
47 39 48 59 68        
100 65 78 87 98        
220 110 120 145          



E-Mail:mail@bennic.com.tw