FAQ RoHS/Report ISO order inquiry Profile HOME ENGLISH Chinese Simplified Chinese Traditional BENNIC

X-OVER NETWORK Inductors Non-Polar Capacitors *Co-Axial Speaker Use *X-OVER Network Use Reliable Film Capacitors Non-Polar Capacitors *Co-Axial Speaker Use *X-OVER Network Use Uni-Polar Aluminium Electrolytic Capacitors For Speaker *Binding Post *Terminals CEMENT TYPE WIRE WOUND RESISTORS L-PAD Attenuators


BENNIC \ UNI-POLAR ALUMINIUM ELECTROLYTIC CAPACITORS \
   SL(Axial) | SL(Radial)/TM | MN MX | LL LX | ML | LN | TM | TX |
   HA | HX | PB PX | SD | SI | SX | LG | SW |     [ General Information ]

BENNIC
ALUMINIUM ELECTROLYTIC CAPACITORS

PB,PX Series Used in video as horizontal defletion current correction.
It prodives high frequency, high-ripple, high reliability.
The product is applied for 85 ºC (PB Series) or
105 ºC(PX Series).
Bi-Polar for TV Horizontal Deflection.
SPECIFICATION
ITEM SPECIFICATION
Capacitance Tolerance
(1KHz 20 ºC )
± 10%(K)
Rated Working
Voltage
25 ~ 50WV
Operation
Temperature Range
-40 ~ +85 ºC(PB Series)   -40 ~ +105 ºC (PX Series)
Surge Voltage (V)
( 20 ºC )
WV 25 35 50
SV 32 44 63
Leakage Current
( μA)( 20 ºC )
I 100
After rated voltage applied for 3 minutes
I: Leakage Current ( μA )
Dissipation Factor (%)
(1KHz, 20 ºC )
WV 25 35 50
DF 5 5 5
Load Life After 1000 hours application of W.V.
at 85 ºC (PB Series) or 105 ºC (PX Series)
The capacitor shall meet the following limits .
(a) Capacitance Change Within ± 10% of  Initial Measured Value
(b) Dissipation Factor Within ± 200% of  Initial Measured Value
(c) Leakage Current Within Initial Measured Value
Shelf Life Following characteristics shall be satisfied when return to 25 ºC,
after without rated voltage applied 1000 hours
at 85 ºC (PB Series) or 105 ºC (PX Series)
(a) Capacitance Change Within ± 10% of  Initial Measured Value
(b) Dissipation Factor Within ± 200% of  Initial Measured Value
(c) Leakage Current Within Initial Measured Value

Sleeve Standard color : BLACK, DARK BLUE.
    Or all other color will be accepted only based M.O.Q. 500K per order for each item,
    otherwise unless you could accept non-compliance Sony SS-00259
    (Still compliance with RoHS required).

DIMENSIONS (unit:mm)


øD 10 13 16 18 20 220 25
P 5.0 5.0 7.5 10.0 10.0 10.0 12.5
ød 0.6 0.6 0.8 0.8 0.8 0.8 0.8
a 1.0 2.0 2.0 2.0 2.0 2.0 2.0
b 0.5 1.0 1.0 1.0 1.0 1.0 1.0


  CASE SIZE (mm) øD x L
μF \ WV 25 35 50
1     10 x 20
1.2   10 x 20 13 x 20
1.5   10 x 20 13 x 20
1.8 10 x 20 13 x 20 13 x 20
2.2 13 x 20 13 x 20 13 x 20
2.7 13 x 20 13 x 20 13 x 25
3.3 13 x 20 13 x 25 16 x 26
3.9 13 x 20 13 x 25 16 x 26
4.7 13 x 25 16 x 26 16 x 26
5.6 16 x 26 16 x 26 16 x 32
6.8 16 x 26 16 x 32 16 x 36
8.2 16 x 26 16 x 32 18 x 36
10 16 x 32 16 x 36 18 x 40
12 16 x 36 18 x 36 20 x 40
15 18 x 36 18 x 40 22 x 40
18 18 x 40 20 x 40 25 x 40
22 20 x 40 22 x 40 25 x 40
27 20 x 40 25 x 40  
33 25 x 40    


MAXIMUM RIPPLE CURRENT (A) 15.75KHz/85 ºC(PB Series) or 105 ºC (PX Series)
μF \ WV 25 35 50
1     1.6
1.2   1.8 2.1
1.5   2.1 2.4
1.8 2.2 2.6 2.6
2.2 2.9 2.9 2.9
2.7 3.2 3.2 3.5
3.3 3.6 3.9 4.5
3.9 3.9 4.2 4.8
4.7 4.7 5.3 5.3
5.6 5.9 5.9 6.4
6.8 6.5 7.0 8.0
8.2 7.1 7.7 8.7
10 8.6 9.0 10
12 10 10 11
15 11 12 13
18 13 14 16
22 15 16 18
27 18 19  
33 22    


EQUIVALENT SERIES RESISTANCE (E.S.R)( Ω ) 1KHz/20 ºC
μF \ WV 25 35 50
1     7.961
1.2   6.634 6.634
1.5   5.307 5.307
1.8 4.423 4.423 3.618
2.2 3.618 3.618 3.618
2.7 2.948 2.948 2.948
3.3 2.412 2.412 2.412
3.9 2.041 2.041 2.041
4.7 1.693 1.693 1.693
5.6 1.421 1.421 1.421
6.8 1.170 1.170 1.170
8.2 0.970 0.970 0.970
10 0.796 0.796 0.796
12 0.663 0.663 0.663
15 0.530 0.530 0.530
18 0.442 0.442 0.442
22 0.361 0.361 0.361
27 0.294 0.294  
33 0.241    



E-Mail:mail@bennic.com.tw