FAQ RoHS/Report ISO order inquiry Profile HOME ENGLISH Chinese Simplified Chinese Traditional BENNIC

X-OVER NETWORK Inductors Non-Polar Capacitors *Co-Axial Speaker Use *X-OVER Network Use Reliable Film Capacitors Non-Polar Capacitors *Co-Axial Speaker Use *X-OVER Network Use Uni-Polar Aluminium Electrolytic Capacitors For Speaker *Binding Post *Terminals CEMENT TYPE WIRE WOUND RESISTORS L-PAD Attenuators


BENNIC \ UNI-POLAR ALUMINIUM ELECTROLYTIC CAPACITORS \
   SL(Axial) | SL(Radial)/TM | MN MX | LL LX | ML | LN | TM | TX |
   HA | HX | PB PX | SD | SI | SX | LG | SW |     [ General Information ]

BENNIC
ALUMINIUM ELECTROLYTIC CAPACITORS

SD Series High C/V products used filter.
It provides higher ripple current and easily PCB mounting
as an auxiliary lead included.
General Electronic Circuits High C/V
SPECIFICATION
ITEM SPECIFICATION
Capacitance Tolerance
(120Hz 20 ºC )
± 20%(M)
Rated Working
Voltage
10 ~ 160WV
Operation
Temperature Range
-40 ~ +85 ºC
Surge Voltage (V)
( 20 ºC )
WV 10 16 25 35 50 63 80 100 160
SV 13 20 32 44 63 79 100 125 200
Leakage Current
( μA)( 20 ºC )
I 0.02CV + 3 μA
Whichever is greater after rated voltage applied for 3 minutes
I:Leakage Current ( μA) C:Capacitance( μF) V:Voltage(V)
Dissipation Factor(%)
(120Hz,20 ºC )
WV 10 16 25 35 50 63 80 100 160
DF 50 35 35 30 25 25 20 20 25
Low Temperature
Characteristics
Impedance Ratio at 120HZ
Comparison Z \ WV 10 16 25 35 50 63 80 100 160
-25 ºC / 20 ºC 5 4 4 3 3 3 3 3 3
-40 ºC / 20 ºC 18 15 15 10 10 10 10 10 6
Load Life After 1000 hours application of W.V.at 85 ºC
The capacitor shall meet the following limits .
(a) Capacitance Change Within ± 20% of  Initial Measured Value
(b) Dissipation Factor Within ± 200% of  Initial Measured Value
(c) Leakage Current Within Initial Measured Value
Shelf Life Following characteristics shall be satisfied when return to 25 ºC,
after without rated voltage applied 1000 hours at 85 ºC .
(a) Capacitance Change Within ± 20% of  Initial Measured Value
(b) Dissipation Factor Within ± 200% of  Initial Measured Value
(c) Leakage Current Within Initial Measured Value

Sleeve Standard color : BLACK, DARK BLUE.
    Or all other color will be accepted only based M.O.Q. 500K per order for each item,
    otherwise unless you could accept non-compliance Sony SS-00259
    (Still compliance with RoHS required).

DIMENSIONS (unit:mm)


øD 22 25 30
P 10 12.5 15
ød 1.0 1.0 1.0


CASE SIZE (mm) øD x L
μF \ WV 10 16 25 35 50 63 80 100 160
100                  
220                 22 x 30
330                 22 x 40
470               22 x 25 25 x 40
680             22 x 25 22 x 30 30 x 50
1000           22 x 25 22 x 30 22 x 40  
2200       22 x 25 22 x 30 22 x 40 25 x 40 30 x 50  
3300   22 x 25 22 x 25 22 x 30 22 x 40 25 x 40 25 x 50    
4700   22 x 25 22 x 30 22 x 40 25 x 40 25 x 50 30 x 50    
6800 22 x 25 22 x 30 22 x 40 25 x 40 25 x 50 30 x 50      
10000 22 x 30 22 x 40 25 x 40 22 x 50 30 x 50        
1500 22 x 40 25 x 40 30 x 50            
2200 22 x 50 30 x 50              


MAXIMUM RIPPLE CURRENT (mA) 120Hz / 85 ºC
μF \ WV 10 16 25 35 50 63 80 100 160
100                  
220                 615
330               835 855
470               855 1095
680             870 1080 1610
1000           1050 1135 1485  
2200       680 960 1910 2050 2895  
3300   1445 1560 1845 2340 2510 2770    
4700   1725 2010 2495 3000 3305 3660    
6800 1940 2240 2740 3225 3975 4405      
10000 2540 3075 3575 4315 5345        
1500 3525 4050 5350            
2200 5060 5995              

 


E-Mail:mail@bennic.com.tw