FAQ RoHS/Report ISO Ordering Instructions order inquiry Profile HOME ENGLISH thai Chinese Simplified Chinese Traditional BENNIC

X-OVER NETWORK Cable Harness Non-Polar Capacitors *Co-Axial Speaker Use *X-OVER Network Use Non-Polar Electrolytic Capacitors Reliable Film Capacitors Non-Polar Electrolytic Capacitors Reliable Film Capacitors Axial Electrolytic Capacitors For Speaker *Binding Post *Terminals CEMENT TYPE WIRE WOUND RESISTORS Inductors L-PAD Attenuators


BENNIC \ CEMENT POWER RESISTORS \

"BENNIC" SQ CEMENT POWER RESISTORS


All the cement resistors produced by our company are wound with ceramic rods.
It is not usual to use FRP fiberglass rods for winding.
The cost of raw materials for ceramic rod is slightly higher, but the heat resistance is high and the quality is stable.


The wire wound resistor is sealed with special nonflame cement
    In the ceramic package.
1. Small dimension, low price, excellent stability In high temperature
    humidity and shock.
2. Completely insulated for printed circuit board.
3. Wind the resistance wire on ceramic core and end weld to terminal
    cap, thus, resistance value is correct and with better life proof in
    comparison with other methods.


1) DIMENSION

 
SQP
Series
SQP
Series
DIMENSION (mm) RANGE (Ω) MPQ

pcs/box
Watts W ± 1 H ± 1 L ± 1.5 d ± 0.05 SQP RS+SQP
2W 7 7 18 0.8 0.1~60 61-33K 700
3W 8 8 22 0.8 0.1~180 181~33K 600
5W 10 9 22 0.8 0.1~180 181~50K 500
7W 10 9 35 0.8 0.1~430 431~50K 400
10W 10 9 48 0.8 0.1~470 471~50K 350
15W 12.5 12.5 48 0.8 0.5~600 601~150K 189
20W-25W 14 13.5 60 0.8 0.5~1K 1.1~150K 112
40W 20 20 90 0.8     80


 
SQM
Series
SQM
Series
DIMENSION (mm) RANGE (Ω) MPQ

pcs/box
Watts H ± 1.5 W ± 1 S ± 1 SQM RS+SQM
2W 20 12 8 0.1~60 61~33K 800
3W 25 12 8 0.1~180 181~33K 750
5W 25 13 9 0.1~180 181~50K 700
7W 39 13 9 0.1~430 431~50K 500
10WS 35 16 12 0.1~430 431~50K 350
10W 51 13 9 0.1~471 471~50K 350


 

SQZ
Series
SQZ
Series
DIMENSION (mm) RANGE (Ω) MPQ

pcs/box
Watts L
±1.5
W
±1.5
H
±1.5
S
±1.5
P1 P2 P3
±0.5
P4
±0.2
H1
±1
H2
±1
SQZ RS+SQZ
5W 25(28) 9.5 9.5 9.5(15) 4 2 7.5 1.5 26 12.5 0.1~200 201~50K 400
7W 36 9.5 9.5 20.5 4 2 7.5 1.5 26 12.5 0.1~500 501~50K 320
10W 48 9.5 9.5 34 4 2 7.5 1.5 26 12.5 0.1~800 801~50K 320
15W 48 12.5 12.5 34 7.5 4 10 3 34.5 15.0 0.1~800 801~150K 192
20W 63 12.5 12.5 45 7.5 4 10 3 34.5 15.0 10.5~1K 1.1K~150K 128
25W 63 12.5 12.5 45 7.5 4 10 3 34.5 15.0 10.5~1K 1.1K~150K 128


 
SQY
Series
SQY
Series
DIMENSION (mm) RANGE (Ω) MPQ

pcs/box
Watts L ± 1.5 W ± 1 H ± 1 S ± 1.5 H1 ± 1 H2 ± 1 SQY RS+SQY
5W 25(28) 9.5 9.5 9.5(15) 24 9.5 0.1~200 201~50K 400
7W 36 9.5 9.5 20.5 24 9.5 0.1~500 501~50K 300
10W 48 9.5 9.5 32 24 9.5 0.1~800 801~50K 300
15W 48 12.5 12.5 32 34.5 15.0 0.1~800 801~150K 200
20W 63 12.5 12.5 45 34.5 15.0 10.5~1K 1.1K~150K 120


 
SQT
Series
SQT
Series
DIMENSION (mm) RANGE (Ω) MPQ

pcs/box
Watts H ± 1.5 W ± 1 L ± 1 t ± 1 SQT RS+SQT
5W 9 10 22 1.5 0.1~180 181~50K 500
7W 9 10 35 3.0 0.1~430 431~47K 400
10W 9 10 48 3.0 0.1~470 471~47K 350


 
SQH
Series
 

SQHG
Series

SQH DIMENSION (mm) RANGE (Ω) MPQ

pcs/box
Watts W ± 1 H ± 1 L ± 1.5 S ± 1 H1 ± 1 d
± 0.5
P1
± 0.2
P2
± 0.2
P3
± 0.2
P4
± 0.2
SQH RS+SQH
10W 10.5 10.5 48 33 19.5 3.8 11 6 5.8 2.5 0.1~800 801~50K 400
15W 12 12.5 48 33 20.5 3.8 11 6 6.5 3.0 0.1~800 801~150K 320
20/25W 12 12.5 63 48 28 3.8 11 6 6.5 3.0 0.1~1K 1.1K~150K 320
30W 18 19 63.5 56 28 4.2 18 8 10 3.0 0.5~1K ~ 192
40W 18 19 90 71 28 4.5 18 8 10 3.0 1.0~5K ~ 128


 

ALP
Series

Aluminum
case

  
Aluminum case Wire-Wound Resistors
** Case standard color: Gold

ALP
Series
DIMENSION (mm) MPQ

pcs/box
Watts / Size L1
Min
L2
± 1
L3
± 1
A
± 1
B
± 1
C
± 1
H
± 1
T
± 0.5
5W 25.00 15.50 11.50 16.50 12.50 8.50 8.50 1.60 200
10W 30.00 19.00 14.50 20.50 16.00 11.00 10.00 2.00 200
25W 45.00 27.00 18.50 27.50 20.00 14.00 14.00 2.00 100
50W 65.00 50.00 40.00 29.50 21.50 16.00 16.00 2.00 100

2) TEMPERATURE RISE


3) ELECTRICAL PERFORMANCE
Test Items Condition Specification
Resistance Temp. Coelf 30 ºC ~ 200 ºC ± 300 ppm/ ºC
Short Time Over Load 10 times of rated wattage for 5 sec. ± 2%
Rate Load Rate watt 30 min. ± 1%
Voltage Durability 800V AC 1 min. not changed
Insulation Resistance 500V megger 20 M Ω
Temp. Cycle -30 ºC ~ 85 ºC 5 cycles ± 1%
Load Life 70 ºC on-off cycle 1000 hrs. ± 5%
Moisture-proof Load Life 40 ºC 95% RH on-off cycle 500hrs. ± 3%
Incombustibility 6 times of rated wattage for 5 min, not flamed

 
 

BENNIC   CEMENT POWER RESISTORS

 
SQF Series (Flat Sheet Type )

1. Low inductance.
2. Safety flameproof construction.
3. Thin Light weight body save the PCB space considerably.
4. Tolerance available ±10%, ±5% ±2% .
  
1) DIMENSION (mm)
SQF
Series
DIMENSION (mm) RANGE (Ω) MPQ

pcs/box
Watts L ± 1.0 H ± 1.0 W ± 1.0 d ± 0.1 p ± 1.5  
3W 13.5 13 5 0.75 10 0.1~1Ω 800
3W+3W 26 13 5 0.75 10 0.1~1Ω 600
5W 13 18 5 0.75 10 0.1~1Ω 600
5W+5W 26 18 5 0.75 10 0.1~1Ω 400
7W+7W 26 20 5 0.75 10 0.1~1Ω 300

2) DERATING CURVE

3) ELECTRICAL PERFORMANCE
Test Items Condition Specification
Resistance Temp. Coelf

-55 ºC ~ 155 ºC

± 300 ppm/ ºC

Short Time Over Load

10 times of rated wattage for 5 sec.

± 2%

Rate Load

Rate watt 30 min.

± 1%

Voltage Durability

1,000V AC 1 min.

Not changed

Insulation Resistance

500V megger

1,000 M Ω

Load Life

70 ° C on-off cycle 1,000 hrs.

± 5%

Moisture-proof Load Life

40 ° C 95% RH on-off cycle 1,000hrs.

±5 %

Incombustibility

16 times of rated wattage for 5 min,

not flamed


   4) STANDARD PACK QUANTITY
Series Watts pcs/box pcs / box
10.5" x 10" x 8"
pcs / carton
21.25" x 10.75" x 17.25"
SQP 2W 700 700 2800
3W 600 600 2400
5W 500 500 2000
7W 400 400 1600
10W 350 350 1400
15W 300 300 1200
20W-25W 112 112 448
40W 80 80 320
SQM 2W 800 800 3200
3W 750 750 3000
5W 700 700 2800
7W 500 500 2000
10WS 350 350 1400
10W 350 350 1400
SQZ 5W 400 400 1600
7W 320 320 1280
10W 320 320 1280
15W 192 192 768
20W 128 128 512
25W 128 128 512
SQY 5W 400 400 1600
7W 300 300 1200
10W 300 300 1200
15W 200 200 800
20W 120 120 480
SQT 5W 300 300 1200
7W 200 200 800
10W 200 200 800
SQH 10W 400 400 1600
15W 320 320 1280
20/25W 320 320 1280
30W 192 192 768
40W 128 128 512
ALP 5W 200 200 800
10W 200 200 800
25W 100 100 400
50W 100 100 400
SQF 3W 800 800 3200
3W+3W 600 600 2400
5W 600 600 2400
5W+5W 400 400 1600
7W+7W 300 300 1200




E-Mail:mail@bennic.com.tw