SOUNDER
S10A & S10R SERIES
BI-POLAR ELECTROLYTIC CAPACITORS
|
 |
|
| 1) FIGURE : |
S10A (AXIAL ) |
S10R (RADIAL ) |
|
LEAD WIRE DIA AT mm, TOL. ± 0.05 mm (AXIAL DIA 12 øLEAD DIA MAYBE 0.6 mm)
| CASE DIA |
8 ø |
10 ø |
12 ø |
13 ø |
16 ø |
18 ø |
20 ø |
22 ø |
25 ø |
| AXIAL |
0.6 |
0.6 |
0.8 |
0.8 |
0.8 |
0.8 |
0.8 |
0.8 |
0.8 |
| RADIAL |
0.6 |
0.6 |
- |
0.6 |
0.8 |
0.8 |
0.8 |
0.8 |
0.8 |
LEAD LENGTH : AXIAL min. 25mm., RADIAL min. 20 mm & 25 mm
RADIAL LEAD PITCH AT mm TOL. ± 0.5 mm
| CASE DIA |
8 ø |
10 ø |
13 ø |
16 ø |
18 ø |
20 ø |
22 ø |
25 ø |
| LEAD PITCH |
3.5 |
5.0 |
5.0 |
7.5 |
7.5 |
8.0 |
10.0 |
12.5 |
|
2) CAP. TOL. RANGE :
|
± 10% (K), or ± 5% (J) @1KHZ
|
3) LEAKAGE
|
Max 0.04 CV +3 μA AFTER CHARGE 5 MINUTES AT25 ºC
|
4) TEMP. RANGE :
|
- 40 ºC TO +85 ºC
|
5) SURGE VOLT :
|
63V FOR 50WV, 125V FOR 100WV
|
6) MAX. D.F. :
|
Max 10% @1KHZ .
|
7) MARKING :
|
SOUNDER
xxx μF xxx V
NP 85 ºC
|
| 8) Sleeve Standard color : |
BLACK , DARK BLUE |
|
9) CASE SIZE (DxL) TABLE (FOR STANDARD VALUE) - AT mm, TOL. ± 1 mm
| SERIES |
S10A (AXIAL) |
S10R (RADIAL) |
| MFD \ WV |
50 WV (D x L) |
100 WV (D x L) |
50 WV (D x L) |
100 WV (D x L) |
| 1.0 |
8 x 17 |
10 x 18 |
8 x 13 |
10 x 15 |
| 1.5 |
8 x 17 |
10 x 18 |
8 x 13 |
10 x 15 |
| 2.2 |
8 x 17 |
10 x 18 |
8 x 13 |
10 x 15 |
| 2.7 |
8 x 17 |
10 x 18 |
8 x 13 |
10 x 15 |
| 3.3 |
8 x 17 |
10 x 18 |
8 x 13 |
10 x 15 |
| 3.9 |
8 x 17 |
10 x 18 |
8 x 13 |
10 x 15 |
| 4.7 |
8 x 17 |
10 x 18 |
8 x 13 |
10 x 15 |
| 5.6 |
10 x 18 |
10 x 18 |
8 x 13 |
10 x 15 |
| 6.8 |
10 x 18 |
10 x 18 |
8 x 13 |
10 x 15 |
| 7.5 |
10 x 18 |
10 x 18 |
8 x 13 |
10 x 15 |
| 8.2 |
10 x 18 |
10 x 18 |
8 x 13 |
10 x 15 |
| 10 |
10 x 18 |
10 x 18 |
10 x 15 |
10 x 15 |
| 12 |
10 x 18 |
12 x 26 |
10 x 15 |
10 x 20 |
| 15 |
10 x 18 |
12 x 26 |
10 x 15 |
10 x 20 |
| 18 |
10 x 18 |
12 x 26 |
10 x 20 |
10 x 20 |
| 22 |
10 x 18 |
12 x 26 |
10 x 20 |
13 x 21 |
| 27 |
12 x 26 |
12 x 26 |
10 x 20 |
13 x 21 |
| 33 |
12 x 26 |
12 x 26 |
10 x 20 |
13 x 21 |
| 39 |
12 x 26 |
12 x 26 |
13 x 21 |
13 x 21 |
| 47 |
12 x 31 |
12 x 31 |
13 x 21 |
13 x 21 |
| 56 |
12 x 31 |
12 x 31 |
13 x 21 |
16 x 27 |
| 68 |
12 x 31 |
13 x 31 |
13 x 21 |
16 x 27 |
| 75 |
12 x 31 |
16 x 34 |
13 x 21 |
16 x 27 |
| 82 |
12 x 31 |
16 x 34 |
13 x 26 |
16 x 27 |
| 100 |
12 x 31 |
16 x 34 |
13 x 26 |
16 x 27 |
| 120 |
12 x 31 |
16 x 34 |
16 x 27 |
16 x 27 |
| 150 |
16 x 34 |
16 x 42 |
16 x 27 |
16 x 36 |
| 180 |
16 x 34 |
18 x 42 |
16 x 27 |
16 x 36 |
| 220 |
16 x 34 |
18 x 42 |
16 x 27 |
18 x 36 |
| 270 |
16 x 34 |
18 x 42 |
16 x 27 |
18 x 36 |
| 330 |
16 x 42 |
22 x 44 |
16 x 36 |
22 x 37 |
| 390 |
16 x 42 |
22 x 44 |
16 x 36 |
22 x 37 |
| 470 |
18 x 42 |
25 x 52 |
18 x 36 |
25 x 43 |
|
** ANY SPECIAL VALUE ARE ACCEPTABLE, ITS SIZE TO BE PROVIDED UPON REQUESTED
** SIZE MAYBE CHANGED W/O NOTICE., SPECIAL SIZE IS ACCEPTABLE
**AXIAL SIZE 8 x 17 MAYBE 10 x 18
** Case size table are our standard series / size / value . Any special requested upon discussion.
** Here we only accept to use the following sleeve color for the full compliance with the
Sony SS-00259 (the sleeve must be use PET material)：Black, Dark blue
or all other color will be accepted only based M.O.Q. 500K per order for each item,
otherwise unless you could accept non-compliance Sony SS-00259
(Still compliance with RoHS required).
|
 E-Mail:mail@bennic.com.tw
|
