|
BENNIC
RELIABLE ACOUSTIC NON-POLAR CAPACITORS
* CO-AXIAL SPEAKER USE *
* X-OVER NETWORK USE *
|
|
 |
|
| BI - POLAR ELECTROLYTIC CAPACITORS |
| SERIES |
MAX. D.F. |
TYPE |
RATED
WORKING
VOLTAGE
RANGE (V) |
CAPACITANCE
RANGE ( μF) |
| P03 |
UNDER 18 μF : 12% @ 20KHZ
EXCEED 22 μF : 20% @ 20KHZ
UNDER 3.3 μF : 4% @ 1KHZ (reference value)
UNDER 3.9 μF : 3% @ 1KHZ (reference value) |
AXIAL
RADIAL
|
50 / 100 |
1.0 - 47 |
| B03 |
UNDER 47 μF : 12% @ 10KHZ
EXCEED 47 μF : 20% @ 10KHZ
3% @ 1KHZ (reference value) |
AXIAL
RADIAL
|
100 |
1.0 - 150 |
| B04 |
10% @ 5KHZ
4% @ 1KHZ (reference value) |
AXIAL
RADIAL |
50 / 100 |
1.0 - 220 |
| B05 |
10% @ 3KHZ
5% @ 1KHZ (reference value) |
AXIAL
RADIAL |
50 / 100 |
1.0 - 330 |
| B06 |
10% @ 2KHZ
6% @ 1KHZ (reference value) |
AXIAL
RADIAL |
50 / 100 |
1.0 - 470 |
| B10 |
10% @ 1KHZ |
AXIAL
RADIAL |
50 / 100 |
1.0 - 1000 |
| B12 |
10% @ 600HZ
12% @ 1KHZ (reference value)
|
AXIAL
RADIAL |
50 / 100 |
1.0 - 1000 |
B15
(N10) |
10% @ 120HZ
15% @ 1KHZ (reference value)
|
AXIAL
RADIAL
AXIAL SPOT
|
25 - 100 |
0.47 - 1000 |
| B25 |
25% @ 1KHZ
|
AXIAL
RADIAL |
25 / 50 |
1.0 - 47 |
| N04 |
4% @ 120HZ |
AXIAL
RADIAL |
50 / 100 |
1.0 - 680 |
| N06 |
6% @ 120HZ |
AXIAL
RADIAL |
50 / 100 |
1.0 - 680 |
| N10 |
10% @ 120HZ |
AXIAL
RADIAL
AXIAL SPOT
|
25 -100 |
0.47 - 1000 |
LOW LOSS BI-POLAR CAPACITORS
GENERAL INFORMATION |
CHART. A - GENERAL SPECIFICATION
| CAPACITANCE : |
0.47 μF - 1,000 μF (ANY VALUE BETWEEN THIS RANGE) |
| SERIES CAP. RANGE : |
B03: FROM 1.0 μF TO 150 μF
B04: FROM 1.0 μF TO 220 μF
B05: FROM 1.0 μF TO 330 μF
B06: FROM 1.0 μF TO 470 μF
B10/N04: FROM 1.0 μF TO 680 μF
B12/N06: FROM 1.0 μF TO 680 μF
B15: FROM 0.47 μF TO 820 μF
N10: FROM 0.47 μF TO 1000 μF |
| WORKING VOLTAGE : |
25V, 50V, 63V, 75V OR 100V |
| DISSIPATION FACTOR : |
ANY D. F. 3% TILL 20% AT ANY FREQUENCY 120HZ TILL 10KHZ |
| TOLERANCE : |
2.5% (H), 5% (J), 10% (K) OR 20% (M) |
| LEAD-OUT : |
RADIAL OR AXIAL |
| TEMP. RANGE : |
- 40 ºC TO +85 ºC (- 40 ºC TO +105 ºC ALSO AVAILABLE UPON REQUESTED) |
| LEAKAGE CURRENT : |
MAX. 0.04CV +3 (UNIT μA) C = CAPACITANCE ( μF)., V=WV (V) |
| SLEEVE STANDARD COLOR : |
Black , Dark blue , Yellow (B03 SERIES ONLY) |
|
PLEASE SPECIFY DETAILS OF EACH ITEM'S OF YOUR USING :
| |
(1) CAPACITANCE AND TOLERANCE
(2) WORKING VOLTAGE
(3) LEAD-OUT AT RADIAL OR AXIAL, AND IF ANY LIMITE ON PHYSICAL SIZE LIMITED
( Please note that the reserved space must be bigger than the maximum size plus the
tolerance. For example, if the capacitors marked size is 6*18mm and tolerance is ±1mm,
the reserved space should be bigger than 7*19mm. )
(4) RATED FREQUENCY
(5) MAX. DISSIPATION FACTOR OR MIN. Q VALUE
(6) IF TEMP. RANG NEEDED - 40 ºC TO +105 ºC
(7) IF ANY SPECIAL REQUESTED FOR LEAD FORMED OR PROCESSED, OR OTHERS. |
|
CHART. B - HOW TO ORDER/READ OUR PARTS NUMBER
|
DIGIT : |
1 |
2 |
3 |
4 |
|
5 |
6 |
7 |
8 |
9 |
0 |
A |
B~Z |
|
|
P/ N : |
B |
0 |
3 |
A |
- |
1 |
0 |
0 |
J |
4 |
7 |
5 |
|
(4.7 μF / 100V DF 3% @ 1KHZ, AXIAL, TOL. 5%) |
| |
N |
1 |
0 |
R |
- |
0 |
5 |
0 |
M |
2 |
2 |
7 |
|
(220 μF / 50V DF 10% @ 120HZ, AXIAL, TOL. 20%) |
| |
P |
0 |
3 |
R |
- |
1 |
0 |
0 |
K |
8 |
2 |
5 |
|
(8.22 μF / 100V PLAIN FOIL, RADIAL, TOL. 10%) |
|
| DIGIT 1 : |
RATED FREQUENCY B = 1 KHZ, X = 575HZ, Y = 300HZ, N =120HZ
P = 1KHZ TO 20KHZ (MADE BY PLAIN FOILS) |
| 2 / 3 : |
RATED MAX. D.F. VALUE., i.e. 04=4% 05=5% 10=10% 20=20% |
| 4 : |
" A " OR EMPTY - MEANS " AXIAL" LEADS
" R " - MEANS " RADIAL" LEADS
" S " - MEANS " SPOT " LEADS (ONLY APPLY FOR B15 & N10 SERIES) |
| 5 / 6 / 7 : |
MEANS RATED WORKING VOLTAGE, i.e. :
025 = 25V , 050 = 50V , 063 = 63V , 100 = 100V |
| 8 : |
MEANS CAPACITANCE TOLERANCE., i.e.
H = ± 2.5% J= ± 5% K= ± 10% M= ± 20% |
| 9 / 0 / A : |
RATED CAPACITANCE., i.e.
104 = 0.10 μF , 105 = 1.0 μF , 106 = 10 μF , 107 = 100 μF
474 = 0.47 μF , 475 = 4.7 μF , 476 = 47 μF , 477 = 470 μF |
| B~Z : |
SUFFIX FOR ANY SPECIAL REQUEST. |
|
** PLEASE FEEL FREE TO CONTACT US IN CASE YOU HAVE ANY QUIRES.
** Following data sheets are our standard series / size / value . Any special requested upon discussion.
** Here we only accept to use the following sleeve color for the full compliance with the
Sony SS-00259 (the sleeve must be use PET material)：Black, Dark blue , Yellow(B03)
or all other color will be accepted only based M.O.Q. 500K per order for each item,
otherwise unless you could accept non-compliance Sony SS-00259
(Still compliance with RoHS required).
|
|
|
|
METALLIZED POLYESTER FILM CAPACITORS |
| SERIES |
MAX. D.F. |
TYPE |
RATED
WORKING
VOLTAGE
RANGE (V) |
CAPACITANCE
RANGE ( μF) |
BMET
(PEMT) |
1.0% @ 1KHZ |
AXIAL TUBULAR |
100 - 630 |
0.10 - 120 |
BMEF
(PEMF) |
1.0% @ 1 KHZ |
AXIAL
FLAT |
100 - 630 |
0.10 - 120 |
BMED
(PEMD) |
1.0% @ 1KHZ |
RADIAL DIPPED |
100 - 630 |
0.10 - 6.8 |
METALLIZED POLYESTER CAPACITORS
GENERAL INFORMATION
|
CHART. A - GENERAL SPECIFICATION
| CAPACITANCE : |
0.10 μF TO 120 μF |
| WORKING VOLTAGE : |
100 - 630V |
| TOLERANCE : |
1% (F), 2.5% (H), 5% (J), 10% (K), OR 20% (M) |
| DISSIPATION FACTOR : |
MAX. 1% (0.01) AT 1KHZ |
| TEMP. RANGE : |
- 40 ºC TO +85 ºC (- 40 ºC TO +105 ºC ALSO AVAILABLE UPON REQUESTED) |
| INSULATING RESIS : |
C ≤ 0.33μF , I.R. ≥ 7500 Mega-Ohm (AT 20 ºC, 1min)
C > 0.33μF , I.R ≥ 5000 Mega-Ohm (AT 20 ºC, 1min) |
|
PLEASE SPECIFY DETAILS OF EACH ITEM'S OF YOUR USING :
| |
(1) WHICH KIND POLYESTER FILM YOU USE
(2) CAPACITANCE AND TOLERANCE
(3) WORKING VOLTAGE, RATED DC OR AC
(4) LEAD OUT & SHARP (i.e. D.T.F. OR E), ALSO WHAT LEAD SPACE OF RADIAL
LEADS OR ANY PHYSICAL SIZE LIMITED
(5) ANY SPECIAL FINISHING (i.e. TAPPING OR LEAD FORMING)
|
|
CHART. B - HOW TO ORDER/READ OUR PARTS NUMBER
|
DIGIT : |
1 |
2 |
3 |
4 |
|
5 |
6 |
7 |
8 |
9 |
0 |
A |
B |
|
P/ N : |
B |
M |
E |
T |
- |
2 |
5 |
0 |
K |
1 |
0 |
5 |
|
|
| DIGIT 1 : |
BRAND : B - BENNIC , S - Sounder |
| 2 / 3 : |
ME - METALLIZED POLYESTER , NON - INDUCTIVE |
| 4 : |
"T" - MEANS "AXIAL TUBULAR "
"F" - MEANS "AXIAL FLAT"
"D" - MEANS "RADIAL DIPPED"
"E" - MEANS "RADIAL ENCASE" |
| 5 / 6 / 7 : |
RATED VOLTAGE (* PLS ADDING "AC" - IF AC VOLTAGE ), i.e.
100 = 100VDC., 250 = 250VDC., 400 = 400VDC., 1K0 = 1KVDC |
| 8 : |
RATED CAPACITANCE TOLERANCE., i.e.
F = ± 1% , H = ± 2.5% , J = ± 5% , K = ± 10% , M = ± 20% |
| 9 / 0 / A : |
RATED CAPACITANCE., i.e.
104 = 0.10 μF , 105 = 1.0 μF , 106 = 10 μF , 107 = 100 μF
474 = 0.47 μF , 475 = 4.7 μF , 476 = 47 μF , 477 = 470 μF |
| B : |
SUFFIX FOR ANY SPECIAL REQUEST. |
|
PLEASE FEEL FREE TO CONTACT US IN CASE YOU HAVE ANY QUIRES.
|
|
|
|
METALLIZED POLYPROPYLENE FILM CAPACITORS |
| SERIES |
MAX. D.F. |
TYPE |
RATED
WORKING
VOLTAGE
RANGE (V) |
CAPACITANCE
RANGE ( μF) |
|
BMPT
(PPMT) |
0.1% @ 1 KHZ |
AXIAL TUBULAR |
250 - 630 |
0.10 - 47 |
| XPP |
0.07% @ 1KHZ |
AXIAL TUBULAR |
160VAC- 250VAC |
1.0 - 47 |
| SPP |
0.07% @ 1KHZ |
AXIAL TUBULAR |
160VAC- 250VAC |
1.0 - 47 |
| CPP |
0.1% @ 1KHZ |
AXIAL TUBULAR |
250VAC |
2.2 - 10 |
| FPP |
0.06% @ 1KHZ |
AXIAL TUBULAR |
250VDC- 630VDC |
0.01 - 82 |
| UPP |
0.06% @ 1KHZ |
AXIAL TUBULAR |
250VDC- 630VDC |
0.01 - 82 |
METALLIZED POLYPROPYLENE CAPACITORS
GENERAL INFORMATION |
CHART. A - GENERAL SPECIFICATION
| CAPACITANCE : |
0.10 μF TO 47 μF |
| WORKING VOLTAGE : |
100 - 630VDC (63VAC TO 400VAC) |
| TOLERANCE : |
1% (F), 2.5% (H), 5% (J), 10% (K), OR 20% (M) |
| DISSIPATION FACTOR : |
MAX. 1% (0.01) AT 1KHZ |
| TEMP. RANGE : |
- 40 ºC TO +85 ºC (- 40 ºC TO +105 ºC ALSO AVAILABLE UPON REQUESTED) |
| INSULATING RESIS : |
C ≤ 0.33μF , I.R. ≥ 9000 Mega-Ohm (AT 20 ºC, 1min)
C > 0.33μF , I.R ≥ 7500 Mega-Ohm (AT 20 ºC, 1min) |
|
PLEASE SPECIFY DETAILS OF EACH ITEM'S OF YOUR USING/INQUIRY :
| |
(1) WHICH KIND POLYPROPYLENE FILM YOU USE
(2) CAPACITANCE AND TOLERANCE
(3) WORKING VOLTAGE, RATED DC OR AC
(4) LEAD OUT & SHARP (i.e. D.T.F. OR E), ALSO WHAT LEAD SPACE OF RADIAL
LEADS OR ANY PHYSICAL SIZE LIMITED
(5) ANY SPECIAL FINISHING (i.e. TAPPING OR LEAD FORMING)
|
|
CHART. B - HOW TO ORDER/READ OUR PARTS NUMBER
|
DIGIT : |
1 |
2 |
3 |
4 |
|
5 |
6 |
7 |
8 |
9 |
0 |
A |
B |
|
P/ N : |
B |
M |
P |
T |
- |
2 |
5 |
0 |
K |
1 |
0 |
5 |
|
|
P/ N : |
X |
P |
P |
|
- |
2 |
5 |
0 |
K |
1 |
0 |
5 |
|
|
| DIGIT 1 : |
BRAND : B - BENNIC , S - Sounder |
| 2 / 3 : |
MP - METALLIZED POLYPROPYLENE , NON-INDUCTIVE |
| 4 : |
"T" - OR EMPTY MEANS "AXIAL TUBULAR "
"F" - MEANS "AXIAL FLAT"
"D" - MEANS "RADIAL DIPPED"
"E" - MEANS "RADIAL ENCASE" |
| 5 / 6 / 7 : |
RATED VOLTAGE (* PLS ADDING "AC" - IF AC VOLTAGE ), i.e.
100 = 100VDC., 250 = 250VDC., 400 = 400VDC., 1K0 = 1KVDC
** FOR XPP : 250 = 160VAC / 250VDC., 400 = 250VAC / 400VDC., |
| 8 : |
RATED CAPACITANCE TOLERANCE., i.e.
F = ± 1% , H = ± 2.5% , J = ± 5% , K = ± 10% , M = ± 20% |
| 9 / 0 / A : |
RATED CAPACITANCE., i.e.
104 = 0.10 μF , 105 = 1.0 μF , 106 = 10 μF , 107 = 100 μF
474 = 0.47 μF , 475 = 4.7 μF , 476 = 47 μf , 477 = 470 μF |
| B : |
SUFFIX FOR ANY SPECIAL REQUEST. |
|
PLEASE FEEL FREE TO CONTACT US IN CASE YOU HAVE ANY QUIRES.
|
|
|
| |
 E-Mail:mail@bennic.com.tw
|
|
