FAQ RoHS/Report ISO Ordering Instructions order inquiry Profile HOME ENGLISH thai Chinese Simplified Chinese Traditional BENNIC

X-OVER NETWORK Cable Harness Non-Polar Capacitors *Co-Axial Speaker Use *X-OVER Network Use Non-Polar Electrolytic Capacitors Reliable Film Capacitors Non-Polar Electrolytic Capacitors Reliable Film Capacitors Axial Electrolytic Capacitors For Speaker *Binding Post *Terminals CEMENT TYPE WIRE WOUND RESISTORS Inductors L-PAD Attenuators


BENNIC \ ACOUSTIC NON-POLAR CAPACITORS \ SOUNDER FILM CAPACITORS
METALLIZED POLYESTER FILM >> SMET (AXIAL TUBULAR) | SMED (RADIAL DIPPED)
METALLIZED POLYPROPYLENE FILM >> SMPT (AXIAL TUBULAR) | SMPD (RADIAL DIPPED)

SOUNDER
SMED SERIES (RADIAL DIPPED)
METALLIZED POLYESTER FILM CAPACITORS
SMED SMPD of this series will be stoped selling from January 1, 2021
1) FIGURE :
    BODY SIZE : SEE SELOWING TABLE. LEAD LENGTH MIN.20mm
BODY LENGTH 10.0 12.5 18.0 21.0 31.0 44.0
LEAD PITCH ± 1.5 7.5 10.0 15.0 20.0 27.0 41.0
LEAD DIA ± 0.05 ø 0.6 ø 0.6 ø 0.8 ø 0.8 ø 0.8 ø 0.8 ø
 
2) CAP. TOL. RANGE
 ± 10% (K), or ± 5% (J) @1KHZ
3) DISSIPATION FACTOR
 Max 1% @1KHZ .
4) TEMP. RANGE
 - 40 ºC TO +85 ºC
5) SURGE VOLT
 
 1.25 x RATE VOLTAGE
6) INSULATING RESISTANCE
   		 C ≤ 0.33μF ,   I.R. ≥ 7500 Mega-Ohm (AT 20 ºC, 1min)
C > 0.33μF ,   I.R ≥ 5000 Mega-Ohm (AT 20 ºC, 1min)
7) MARKING
  
 SOUNDER
MED xxxV
xxx μF ± 5%

8) MAX. BODY SIZE (DxL) TABLE (FOR STANDARD VALUE) - AT mm,
  TOL. W/ T/ H ± 1 mm , W/ T/ H 10~20mm ± 2 mm , W/ T/ H >20mm ± 2.5 mm
MFD \ WV
 100 VDC
L x T x H		 250 VDC
L x T x H		 400 VDC
L x T x H		 630 VDC
L x T x H
0.01 13 x 5.5 x 10 13 x 5.5 x 10 13 x 5.5 x 10 13 x 6.0 x 10.5
0.015 13 x 5.5 x 10 13 x 5.5 x 10 13 x 5.5 x 10 13 x 6.0 x 10.5
0.022 13 x 5.5 x 10 13 x 5.5 x 10 13 x 5.5 x 10 13 x 6.5 x 10.5
0.033 13 x 5.5 x 10 13 x 5.5 x 10 13 x 6.5 x 11 13 x 7.0 x 11.5
0.047 13 x 5.5 x 10 13 x 5.5 x 10 13 x 7.0 x 11.5 18 x 6.0 x 10
0.068 13 x 5.5 x 10 13 x 5.5 x 10 13 x 7.5 x 12.5 18 x 8.0 x 12
0.10 13 x 5.5 x 15.5 13 x 5.5 x 12 18 x 6.5 x 11.5 18 x 9.5 x 15
0.15 13 x 8.0 x 12.5 13 x 6.5 x 12.5 18 x 8.0 x 14 24 x 9.0 x 14
0.22 13 x 8.0 x 12.5 13 x 7.5 x 13.5 18 x 9.0 x 15 24 x 10.5 x 16.5
0.33 13 x 8.5 x 13 18 x 8.0 x 14 18 x 10.0 x 16.5 31 x 11.0 x 17.5
0.47 13 x 8.5 x 13 18.8 x 9.5 x 16 24 x 10.5 x 17.5 31 x 12.5 x 22.5
0.68 13 x 8.0 x 13.5 24 x 9.5 x 14 31 x 10.5 x 17.5 31 x 14.0 x 23.5
1.0 18 x 9.5 x 16 24 x 10.5 x 18 31 x 12.0 x 21.5 30 x 15.5 x 25.5
1.5 24 x 12 x 19.5 31 x 10.5 x 20 31 x 14.0 x 24  
1.8 24 x 13 x 21 31 x 16 x 23    
2.2 24 x 13 x 21 31 x 16 x 23    
3.3 31 x 12 x 21 31 x 16 x 24    
4.7 31 x 14 x 22.5 44 x 12 x 18    
6.8 31 x 15.5 x 23.5 44 x 15 x 20    
8.2 31 x 20.2 x 25.5      
10 31 x 20.2 x 25.5      

** ANY SPECIAL VALUE ARE ACCEPTABLE, ITS SIZE TO BE PROVIDED UPON REQUESTED
** SIZE MAYBE CHANGED W/O NOTICE., SPECIAL SIZE IS ACCEPTABLE


E-Mail:mail@bennic.com.tw