FAQ RoHS/Report ISO Ordering Instructions order inquiry Profile HOME ENGLISH thai Chinese Simplified Chinese Traditional BENNIC

X-OVER NETWORK Cable Harness Non-Polar Capacitors *Co-Axial Speaker Use *X-OVER Network Use Non-Polar Electrolytic Capacitors Reliable Film Capacitors Non-Polar Electrolytic Capacitors Reliable Film Capacitors Axial Electrolytic Capacitors For Speaker *Binding Post *Terminals CEMENT TYPE WIRE WOUND RESISTORS Inductors L-PAD Attenuators


BENNIC \ AXIAL UNI-POLAR ALUMINIUM ELECTROLYTIC CAPACITORS \
   SL(Axial) | SL(Radial)/TM | MN MX | LL LX | ML | LN | TM | TX |
   HA | HX | PB PX | SD | SI | SX | LG | SW |     [ General Information ]

BENNIC
ALUMINIUM ELECTROLYTIC CAPACITORS
SL,TM Series Used in General Electronic as Coupling. By-pass, Filter etc.
The product is applied for 85 ºC (SL Series) or
105 ºC (TM Series).
General Electronic Circuits.
SPECIFICATION
ITEM SPECIFICATION
Capacitance Tolerance
(120Hz 20 ºC )		 ± 20%(M)
Rated Working
Voltage		 6.3 ~ 160WV
Operation
Temperature Range		 -40 ~ +85 ºC (SL Series)    -40 ~ +105 ºC (TM Series)
Surge Voltage (V)
( 20 ºC )
WV 6.3 10 16 25 35 50 63 100 160
SV 8 13 20 32 44 63 79 125 200
Leakage Current
( μA)( 20 ºC )		 I 0.01CV + 3 μA
Whichever is greater after rated voltage applied for 3 minutes
I:Leakage Current ( μA) C:Capacitance( μF) V:Voltage(V)
Dissipation Factor(%)
(120Hz,20 ºC )
WV 6.3 10 16 25 35 50 63 100 160
DF(SL Series) 24 20 16 14 12 10 10 10 20
DF(TM Series) 26 22 18 16 14 12 10 10 15
Add 2% per 1000 μF for more than 1000 μF
Low Temperature
Characteristics		 Impedance Ratio at 120HZ
Comparison Z \ WV 6.3 10 16 25 35 50 63 100 160
-25 ºC / 20 ºC 4 3 2 2 2 2 3 2 3
-40 ºC / 20 ºC 8 6 4 4 4 2 3 3 -
Load Life After 2000 hours application of W.V.at 85 ºC
The capacitor shall meet the following limits .
(a) Capacitance Change Within ± 20% of  Initial Measured Value
(b) Dissipation Factor Within ± 200% of  Initial Measured Value
(c) Leakage Current Within Initial Measured Value
Shelf Life Following characteristics shall be satisfied when return to 25 ºC,
after without rated voltage applied 1000 hours at 85 ºC .
(a) Capacitance Change Within ± 20% of  Initial Measured Value
(b) Dissipation Factor Within ± 200% of  Initial Measured Value
(c) Leakage Current Within Initial Measured Value

Sleeve Standard color : BLACK, DARK BLUE.
    Or all other color will be accepted only based M.O.Q. 500K per order for each item,
    otherwise unless you could accept non-compliance Sony SS-00259
    (Still compliance with RoHS required).

DIMENSIONS (unit:mm)

øD 5 6.3 8 10 13 16 18
P 2.0 2.5 3.5 5.0 5.0 7.5 7.5
ød 0.5 0.5 0.6 0.6 0.6 0.8 0.8
a 1.0 1.0 1.0 1.0 2.0 2.0 2.0
b 0.5 0.5 0.5 0.5 1.0 1.0 1.0


CASE SIZE (mm) øD x L
μF \ WV 6.3 10 16 25 35 50 63 100 160
0.1           5 x 11      
0.22           5 x 11      
0.33           5 x 11      
0.47           5 x 11 5 x 11 5 x 11 5 x 11
1.0           5 x 11 5 x 11 5 x 11 5 x 11
2.2           5 x 11 5 x 11 5 x 11 6.3 x 11
3.3           5 x 11 5 x 11 5 x 11 8 x 11
4.7         5 x 11 5 x 11 5 x 11 5 x 11 8 x 11
10         5 x 11 5 x 11 5 x 11 6.3 x 11 10 x 15
22     5 x 11 5 x 11 5 x 11 5 x 11 6.3 x 11 8 x 14 10 x 17
33   5 x 11 5 x 11 5 x 11 5 x 11 6.3 x 11 8 x 11 10 x 17 10 x 20
47   5 x 11 5 x 11 5 x 11 6.3 x 11 6.3 x 11 8 x 11 10 x 17 13 x 25
100 5 x 11 5 x 11 6.3 x 11 6.3 x 11 8 x 11 8 x 14 10 x 15 10 x 20 16 x 26
220 6.3 x 11 6.3 x 11 8 x 11 8 x 14 10 x 15 10 x 17 10 x 20 13 x 25 16 x 32
330 8 x 11 8 x 11 8 x 11 10 x 12.5 10 x 17 10 x 20 13 x 20 16 x 26 18 x 40
470 8 x 11 8 x 11 8 x 14 10 x 17 10 x 20 13 x 20 13 x 25 16 x 32 22 x 40
1000 10 x 12.5 10 x 15 10 x 17 13 x 20 13 x 25 16 x 26 16 x 32    
2200 10 x 20 13 x 20 13 x 25 16 x 26 16 x 36 16 x 36      
3300 13 x 20 13 x 20 13 x 25 16 x 32 16 x 36        
4700 13 x 20 13 x 25 16 x 26 16 x 36          
6800 16 x 26 16 x 36 16 x 32            
10000 18 x 32 18 x 36              
15000 18 x 36                

** Case size table are our standard series / size / value . Any special requested upon discussion.

(SL Series) MAXIMUM RIPPLE CURRENT (mA) 120Hz / 85 ºC
μF \ WV 6.3 10 16 25 35 50 63 100 160
0.1           1.3      
0.22           2.1      
0.33           4.4      
0.47           7 7 12 11
1.0           12 12 22 14
2.2           22 31 32 21
3.3           37 42 42 27
4.7         37 48 48 53 31
10         64 69 74 74 50
22     79 96 100 110 115 125 84
33   64 120 120 125 120 140- 155 120
47   96 140 140 140 140 170 190 140
100 145 195 195 195 230 265 285 365 230
220 260 270 305 330 370 420 470 580 385
330 325 355 375 415 465 535 585 735 570
470 410 430 470 610 590 690 790 940  
1000 625 675 725 895 945 1100 1150    
2200 940 970 1055 1255 1305 1355      
3300 1080 1150 1055 1255 1305        
4700 1235 1265 1425 1255          
6800 1340 1470 1670 1565          
10000 1465 1625              
15000 1725                

(TM Series) MAXIMUM RIPPLE CURRENT (mA) 120Hz / 105 ºC
μF \ WV 6.3 10 16 25 35 50 63 100 160
0.1           1.7      
0.22           3.8      
0.33           5.8      
0.47           8   11 10
1           13   16 14
2.2           19   23 20
3.3           26   30 26
4.7           30 33 33 32
10           45 52 56 49
22       59 64 71 87 98 83
33     67 71 78 94 115 130 120
47   71 82 87 105 140 145 160 140
100 98 115 135 145 175 190 225 280 230
220 160 175 225 235 275 310 360 500 375
330 205 245 270 295 350 410 495 625 460
470 270 290 345 380 450 555 635 805 545
680 330 430 545 665 745 675 1015 965  
1000 420 460 605 695 805 985 1130    
1500 615 765 875 1040 1130 1370 1270    
2200 765 805 985 1130 1310 1520      
3300 915 1015 1240 1420 1610        
4700 1240 1310 1520 1710          
6800 1380 1560 1810            
10000 1630 1810              
15000 1940                



E-Mail:mail@bennic.com.tw