FAQ RoHS/Report ISO Ordering Instructions order inquiry Profile HOME ENGLISH thai Chinese Simplified Chinese Traditional BENNIC

X-OVER NETWORK Cable Harness Non-Polar Capacitors *Co-Axial Speaker Use *X-OVER Network Use Non-Polar Electrolytic Capacitors Reliable Film Capacitors Non-Polar Electrolytic Capacitors Reliable Film Capacitors Axial Electrolytic Capacitors For Speaker *Binding Post *Terminals CEMENT TYPE WIRE WOUND RESISTORS Inductors L-PAD Attenuators


BENNIC \ AXIAL UNI-POLAR ALUMINIUM ELECTROLYTIC CAPACITORS \
   SL(Axial) | SL(Radial)/TM | MN MX | LL LX | ML | LN | TM | TX |
   HA | HX | PB PX | SD | SI | SX | LG | SW |     [ General Information ]

BENNIC
ALUMINIUM ELECTROLYTIC CAPACITORS
LN Series The usage as same as LL Series.
It provides higher performance and reliability
than LL Series in load life as DF is lower.
Epoxy-resin is available due to customer's designation.
Low Noise, Low Leakage.
SPECIFICATION
ITEM SPECIFICATION
Capacitance Tolerance
(120Hz 20 ºC )		 ± 20%(M)
Rated Working
Voltage		 6.3 ~ 50WV
Operation
Temperature Range		 -40 ~ +85 ºC
Surge Voltage (V)
( 20 ºC )
WV 6.3 10 16 25 35 50
SV 8 13 20 32 44 63
Leakage Current
( μA)( 20 ºC )		 I 0.02CV or 4 μA
Whichever is greater after rated voltage applied for 3 minutes
I:Leakage Current ( μA) C:Capacitance( μF) V:Voltage(V)
Dissipation Factor(%)
(120Hz,20 ºC )
WV 6.3 10 16 25 35 50
DF 20 16 14 12 10 8
Low Temperature
Characteristics		 Impedance Ratio at 120HZ
Comparison Z \ WV 6.3 10 16 25 35 50
-25 ºC / 20 ºC 4 3 2 2 2 2
-40 ºC / 20 ºC 8 6 4 4 4 3
Load Life After 1000 hours application of W.V.at 85 ºC
The capacitor shall meet the following limits .
(a) Capacitance Change Within ± 20% of  Initial Measured Value
(b) Dissipation Factor Within ± 150% of  Initial Measured Value
(c) Leakage Current Within Initial Measured Value
Shelf Life Followig chrateristics are meeted when return to 25 ºC,
after at without rated voltage applied 1000 hours at 85 ºC .
(a) Capacitance Change Within ± 20% of  Initial Measured Value
(b) Dissipation Factor Within ± 150% of  Initial Measured Value
(c) Leakage Current Within Initial Measured Value

Sleeve Standard color : BLACK, DARK BLUE.
    Or all other color will be accepted only based M.O.Q. 500K per order for each item,
    otherwise unless you could accept non-compliance Sony SS-00259
    (Still compliance with RoHS required).

DIMENSIONS (unit:mm)

øD 4 5 6.3
P 1.5 2.0 2.5
ød 0.45 0.45 0.45
a 1.0 1.0 1.0
b 0.5 0.5 0.5


CASE SIZE (mm) øD x L
μF \ WV 6.3 10 16 25 35 50
0.1           5x12.5
0.22           5x12.5
0.33           5x12.5
0.47           5x12.5
1.0           5x12.5
2.2           5x12.5
3.3           5x12.5
4.7       5x12.5 5x12.5 5x12.5
10     5x12.5 5x12.5 6.3x12.5 6.3x12.5
22   5x12.5 5x12.5 6.3x12.5 8x12.5 8x12.5
33 5x12.5 5x12.5 5x12.5 8x12.5 8x12.5 10x14.5
47 5x12.5 6.3x12.5 5x12.5 8x12.5 10x14.5 10x16.5
100 6.3x12.5 8x12.5 6.3x12.5 10x14.5 10x18.5  
220 8x12.5 10x14.5 10x16.5 10x21.5    
330 10x14.5 10x16.5 10x18.5      
470 10x16.5 10x18.5        


MAXIMUM RIPPLE CURRENT (mA) 120Hz / 85 ºC
μF \ WV 6.3 10 16 25 35 50
0.1           4.6
0.22           6.9
0..33           8.5
0.47           10
1.0           14
2.2           22
3.3           27
4.7       26 28 32
10     35 38 47 53
22   48 52 64 80 90
33 53 60 72 90 98 130
47 64 81 86 105 140 170
100 105 135 145 180 135  
220 180 235 275 340    
330 360 320 360      
470 340 400        



E-Mail:mail@bennic.com.tw