FAQ RoHS/Report ISO Ordering Instructions order inquiry Profile HOME ENGLISH thai Chinese Simplified Chinese Traditional BENNIC

X-OVER NETWORK Cable Harness Non-Polar Capacitors *Co-Axial Speaker Use *X-OVER Network Use Non-Polar Electrolytic Capacitors Reliable Film Capacitors Non-Polar Electrolytic Capacitors Reliable Film Capacitors Axial Electrolytic Capacitors For Speaker *Binding Post *Terminals CEMENT TYPE WIRE WOUND RESISTORS Inductors L-PAD Attenuators


BENNIC \ AXIAL UNI-POLAR ALUMINIUM ELECTROLYTIC CAPACITORS \
   SL(Axial) | SL(Radial)/TM | MN MX | LL LX | ML | LN | TM | TX |
   HA | HX | PB PX | SD | SI | SX | LG | SW |     [ General Information ]

BENNIC
ALUMINIUM ELECTROLYTIC CAPACITORS
ML Series The usage as same as LL Series.
The size as same as MN Series.
Low Leakage Current Mini Size.
SPECIFICATION
ITEM SPECIFICATION
Capacitance Tolerance
(120Hz 20 ºC )		 ± 20%(M)
Rated Working
Voltage		 4 ~ 63WV
Operation
Temperature Range		 -40 ~ +85 ºC
Surge Voltage (V)
( 20 ºC )
WV 4 6.3 10 16 25 35 50 63
SV 5 8 13 20 32 44 63 79
Leakage Current
( μA)( 20 ºC )		 I 0.002CV + 3 μA
Whichever is greater after rated voltage applied for 3 minutes
I:Leakage Current ( μA) C:Capacitance( μF) V:Voltage(V)
Dissipation Factor(%)
(120Hz,20 ºC )
WV 4 6.3 10 16 25 35 50 63
DF 35 24 20 16 14 12 10 8
Low Temperature
Characteristics		 Impedance Ratio at 120HZ
Comparison Z \ WV 4 6.3 10 16 25 35 50 63
-25 ºC / 20 ºC 7 4 3 2 2 2 2 2
-40 ºC / 20 ºC 5 8 6 4 4 3 3 3
Load Life After 1000 hours application of W.V.at 85 ºC
The capacitor shall meet the following limits .
(a) Capacitance Change Within ± 15% of  Initial Measured Value
(b) Dissipation Factor Within ± 150% of  Initial Measured Value
(c) Leakage Current Within Initial Measured Value
Shelf Life Following characteristics shall be satisfied when return to 25 ºC,
after without rated voltage applied 1000 hours at 85 ºC .
(a) Capacitance Change Within ± 15% of  Initial Measured Value
(b) Dissipation Factor Within ± 150% of  Initial Measured Value
(c) Leakage Current Within Initial Measured Value

Sleeve Standard color : BLACK, DARK BLUE.
    Or all other color will be accepted only based M.O.Q. 500K per order for each item,
    otherwise unless you could accept non-compliance Sony SS-00259
    (Still compliance with RoHS required).

DIMENSIONS (unit:mm)

øD 4 5 6.3
P 1.5 2.0 2.5
ød 0.45 0.45 0.45
a 1.0 1.0 1.0
b 0.5 0.5 0.5


CASE SIZE (mm) øD x L
μF \ WV 4 6.3 10 16 25 35 50 63
0.1             4x7 4x7
0.22             4x7 4x7
0.33             4x7 4x7
0.47             4x7 4x7
1.0             4x7 4x7
2.2             4x7 4x7
3.3             4x7 4x7
4.7           4x7 5x7 6.3x7
10     4x7 4x7 5x7 5x7 6.3x7  
22 4x7 4x7 5x7 5x7 6.3x7 6.3x7    
33 5x7 5x7 4x7 6.3x7 6.3x7      
47 5x7 5x7 5x7 6.3x7        
100 6.3x7 6.3x7 6.3x7          


MAXIMUM RIPPLE CURRENT (mA) 120Hz / 85 ºC
μF \ WV 4 6.3 10 16 25 35 50 63
0.1             1.2 1.4
0.22             2.7 3.1
0..33             3.6 4.2
0.47             5.1 6
1.0             11 13
2.2             18 21
3.3             23 27
4.7           23 27 32
10     25 28 32 35 42  
22 30 34 38 43 48 53    
33 38 42 46 55 59      
47 44 50 57 65        
100 65 78 87          



E-Mail:mail@bennic.com.tw